Valid from: 11/2011
Technical changes reserved
Page 7
Doc.: OM_VIAS & VICD (10D)
Adjustable shelves
The display offers the possibility to adjust the shelves in height and angle (tilt able).
This offers you various presentations of the goods.
You can adjust the shelves 1 step up and down (± 1”) from the centre position.
Remove the glass
Before moving the shelf to another position
please remove the glass. Therefore lift up
the glass on customer side until the s/s lug
(U-profile protection on the glass) slips out
from the bracket – see pictures on right side.
Move the brackets
The shelf brackets are fixed with 2 tabs in
the slots. Upper tab is equipped with 2
notches for level or slant position
1) Lift up the bracket
2) Draw out the brackets to customer side
to remove it from the slots
3) Insert the bracket in the new position
4) Choose level / slant position
Display cases with drawer element
Models Gastro L and Gastro SL, and series Green L and Green SL
are equipped with a drawer, which offers easy loading of the deck
base from service side with large products like cakes or similar.
Remove the drawer to clean evaporator and interior well (
picture
1).
Pull out the drawer to the end position, then lift up the drawer
approximately 5 cm to remove the whole drawer element from the
display case (
picture
2 – showing the telescopic rails).
After removing the drawer you have to take out the stainless steel
blind (
picture
3), then lift up the evaporator coil and fix it in up-position
(
picture
4 – lock on left side of the handle). Now you have access to
clean the interior well and the evaporator coil.
picture 1
picture 2
picture 3
picture 4
IT IS IMPORTANT TO KEEP ALL CABINET DOORS CLOSED. IF THE DOORS ARE
NOT FULLY CLOSED, AN EVEN TEMPERATURE WILL NOT BE MAINTAINED
WITHIN THE DISPLAY CASE.
