The creation of the watering programmes consists in three steps (sub-menus):
at the beginning of the procedure the programme enable is selected (
ON/OFF
),
then the watering cycles are set (
RATE OR CALENDAR
) and finally the watering
start programmes are created (
P01-P10
) with setting of watering time and the
watering start time.
2.3.1- ENABLING WATERING PROGRAMMES (ON/OFF)
From the main menu screen (section 2.1) the watering programmes setting
procedure can be selected by pressing
CONFIRM
when the icon
PRG flashes
.
The first parameter to be set using the keys [+] and [-] is the programme mode:
off
to disable watering (programme disabled),
ON
to enable the programme
(watering cycles enabled).
2.3 - WATERING PROGRAMMES
NOTE:
the icons printed in grey indicate that they are blinking. The rain sensor and
the battery icons are on or off according to the actual charged state of the battery and
the ground conditions (wet or dry).
Programmatore_serie_DIG_GB.indd 12
18/07/12 15.06
