RPB Vision-Link, Инструкция по эксплуатации, Страница: 4 / 24

4
™
HAZARD LIMITATIONS
The RPB ® Vision-Link ™ Light is
NOT FOR USE
if:
 In abrasive blasting applications.
 The temperature is outside the range of 14°F to 131°F (-10°C to 55°C).
 Flammable or explosive atmosphere is present.
 Under water or in excessively wet conditions.
 The battery is damaged or with non RPB
®
batteries or battery chargers.
PROTECTION PROVIDED AND LIMITATIONS
This product is intended for occupational use in accordance with applicable standards or
regulations for your location, industry, and activity (see Employer Responsibilities, page 4.
Familiarity with standards and regulations related to the use of this protective equipment is
recommended, even if they do not directly apply to you. If self-employed or if used in a non-
occupational setting, refer to Employer Responsibilities and Product User Safety Instructions. Go
to rpbsafety.com/importantsafetyinformation/ for helpful links to OSHA and other content.
Employers: Read this manual and carry out the Employer Responsibilities (page 4).
Product users:
Read this manual and follow the Product User Safety Instructions (page 5).
Check website for updates.
Product manuals are regularly updated.
Visit www.rpbsafety.com/resources/for the most recent version of this manual before using the
product.
IMPORTANT SAFETY INFORMATION
EMPLOYER RESPONSIBILITIES
Your specific responsibilities may vary by location and industry, but in general RPB ® expects that
employers will:
 Follow all applicable standards and regulations for your location, industry, and activity.
Depending on your location and industry, a number of standards and regulations may apply to
your selection and use of accessories with personal protective equipment. These may include
such things as federal (e.g., OSHA, MSHA, Canadian Occupational Health and Safety), local
(e.g., state, provincial), or military standards and regulations and consensus standards such as
ANSI and CSA.
 In accordance with the above ,

Perform a hazard analysis and select appropriate equipment for each activity.
A hazard
analysis should be performed by a qualified person. Controls should be in place as
appropriate and a qualified person should determine what kind of accessories are
appropriate to be used.