RPB Vision-Link, Инструкция по эксплуатации, Страница: 11 / 24

11
CHANGING THE BATTERY
Open the latch and then the unit. Remove
the battery from the battery clips.
FIGURE 6.1
Insert the new or recharged battery into
the clips, being sure the positive end of the
battery is in the positive side battery clip.
Close the unit and the latch.
FIGURE 6.2
Insert the negative (-) end of the battery into
the battery charger, using the battery to
slide the metal tab down until the positive
(+) end can be inserted into the charger.
Two batteries can be charged at once.
FIGURE 6.3
CHARGING THE BATTERY