RPB C40 Climate Control, Инструкция по эксплуатации, Страница: 10 / 44

10 10
C40 CLIMATE CONTROL
™
Make sure the area is ventilated and monitored:
 Make sure that the area is well ventilated and that regular air samples are taken to
confirm the atmosphere stays within the levels recommended by applicable regulations
and standards. For Supplied Air, it is recommended to use a GX4
®
Gas Monitor. Follow the
GX4 ® Gas Monitor Instruction Manual.
If you have any questions, ask your employer.
DO NOT ENTER THE WORK AREA if any of the following conditions exist:
 Atmosphere is immediately dangerous to life or health.
 You cannot escape without the aid of the respirator.
 Atmosphere contains less than 19.5% oxygen.
 Contaminants are in excess of regulations or recommendations.
 Contaminants or contaminant concentrations are unknown.
 Work area is poorly ventilated.
 The temperature is outside the range of -10°C to +60°C (14°F to 140°F).
LEAVE THE WORK AREA IMMEDIATELY IF:

Any product component becomes damaged.
 Vision is impaired.

Airflow stops or slows down.
 Breathing becomes difficult

You become dizzy, nauseous, too hot, too cold, or ill.
 Your eyes, nose, or skin become irritated.

You taste, smell, or see contaminants inside the helmet.
 You have any other reason to suspect that the respirator is not providing adequate protection.
PRODUCT CARE
Never place the C40
™
on hot surfaces. Do not apply paints, solvents, adhesives or self-adhesive
labels except as instructed by RPB ® . This product may be adversely affected by certain chemicals.
See the “Inspection, Cleaning and Storage” section (p. 13) for cleaning instructions.
PRODUCT USER SAFETY INSTRUCTIONS CONTINUED