ASSEMBLING FEET:
Drive Plugs (J) into bottom of
Uprights (B). Tap all the way in.
Leveler Screws (K) should be
screwed into (J).
ASSEMBLING FRAME:
Insert Wings (C) into both sides of
each Upright (B) as shown.
1.
J
K
B
J
2.
Insert the Wire Grids
(G) into the channels
on Upright (B).
Note: the Wire Grids
(G) must be inserted
so that
the vertical
wires are inside the
frame.
B
G(2)
The end of the Wire Grid must fit into
the hole at the bottom of the Upright
channel.
Make sure the
horizontal wires that
are set close together
are at the
bottom of
the unit.
C
B
MODULAR MERCHANDISING ASSEMBLY: “T” UNIT
