STEP 1
Slide inside back receivers onto the steel mechanism posts in the
base of the chair (Figure A)
STEP 2
Press both sides of the back firmly into place until the back
automatically locks into place
STEP 3
Connect the Headrest and Lumbar cable plugs (Figure C).
Headrest-only models consist one less set of cables.
5) INSTALLATION
The chair is packed in semi knock down form consisting of the back, and the seat.
• Assemble the chair according to the instruction given in the assembly guide.
• Do not substitute any missing parts. Please contact the place of purchase if you
are missing any parts during assembly.
• Do not assemble the chair with damaged parts.
• Do not assemble the chair if the upholstery or any of the parts of the chair are
damaged.
Attaching the chair back to chair base
CHAIR ASSEMBLY
Attaching the chair wings to the chair back rest*
ASSEMBLY
CAUTION:
Please read all instructions carefully before starting assembly process. It is recommended to
use two people when assembling and removing the inside backs to and from the base of the furniture.
STEP 1
Slide the metal inserts on the chair’s wings into the metal sleeves
on the side of the chair back.
STEP 2
Slide the wings down until they are completely set on the backs
metal sleeves.
How to remove the backrest.
To remove the back from the base, use a screwdriver pressing
outward on the black tab in the metal receivers on both sides
of the chair back and lift the back from the base of the chair.
(Figure B)
