Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
4 / 5
www.royalcraft.co.uk
Step by step assembly instructions
Note:
Tighten only enough to hold parts in place. Do not tighten completely during assembly.
Some adjustments may be necessary to ensure all parts are aligned properly.
Only tighten the bolts when all bolts and washers are in place.
Step One
With the help of another person, place
Table Top (A) upside down on a flat,
non-abrasive surface to avoid scratching
the table surface or rim.
Locate the assembly position on
the bottom side of the Table Top (A).
It is a plastic socket.
Attach the Table Legs (B)
onto the assembly position.
Step Two
Place the Connecting Ring(C) onto the Table Legs (B), using Bolt Head Caps (E), Bolts (D&F),
Flat Washers (G), Nuts (H) and Nut Caps (I).
Once you are satisfied with the alignment of the components, carefully tighten all bolts using
Allen Key (K) and Spanner (L). Do not over-tighten. Cover each bolt with Bolt Head Cap (E).
B
A
B
A
C
K
E
I
L
H G D
K
E
I
L
H G F
Amalfi Ivory 6 Seater Table
Assembly Instructions
