MOUNTING / DEMOUNTING
Mounting
Before beginning to mount the massage table, ensure that the surface is smooth and
guarantees a stable position.
For mounting, also ensure sufficient clearance in every direction (min. 2 m).
Fig. 1
Step 1:
Set the closed massage table on the plastic feet at the bottom edge. Loosen the
upper and lower clasp and open the table as shown in Fig. 1.
Next, remove all accessories.
Fig. 2
Step 2:
Stand behind the reclining area. Grab the handle and pivot the two halves
of the table carefully outwards to open them completely. The legs should open
automatically during this process (see Fig. 2).
Caution: If the legs are blocked when opening the table, it is necessary to
find the cause. Do not open when pushing against a resistance.
Step 3:
Lift the massage table at the middle to position it upright. As soon as the reclining
area is in horizontal position, ensure that the reclining area is level. If it is not yet completely
level, check and adjust the ropes or gently push the reclining area down, if necessary.
Step 4 :
Lock the lateral folding lock on both sides (see Fig. 3).
Fig. 3
Demounting
Unlock the lateral folding lock on both sides (see Fig. 4). Grip the massage table at
the middle and tilt it gently until it stands on the plastic feet at the side.
Next, ensure that the stabiliser bars can be folded, that the steel ropes are exposed
and that the back rest is folded. Moreover, the accessories must not cause a blockage.
Finally, fold the table and close both clasps.
Fig. 4
GB
12
