Royal TS4240 Скачать руководство пользователя страница 98

Страница: 98 / 144

TS4240 User’s Guide

Maintenance and Options

Follow these steps to keep your cash register in good working order.

• Your register must remain uncovered when turned on. This allows the

electronic components to properly cool.

• Use a dust cover when the register is not in operation and the cash register

is set to the OFF position to protect mechanical components from dust.

• Keep beverages and other liquids away from the machine to avoid spills

which can damage electronic components.

• Keep the cash register away from dust, dampness, or extreme hot or cold

temperatures.

• To clean your cash register, use a soft dry cloth.

• After storing your cash register in extreme temperatures (below 32 degrees

Fahrenheit or above 104 degrees Fahrenheit), allow the temperature inside
the machine enough time to reach room temperature before turning it on.

• If you need electronic service, take the cash register to a Royal authorized

service center. For more information, see Manufacturer’s Limited
Warranty on page 130.

• Do not attempt to open or repair the cash register yourself. There are no

end-user serviceable parts in the cash register and it should only be opened
or serviced by an authorized service representative. Attempting to service
the cash register yourself voids the warranty and may permanently
damage the cash register.

HAPTER

Содержание TS4240

















































































































































Результаты поиска

Содержание TS4240

Отзывы:

Royal TS4240, Руководство пользователя, Страница: 98 / 144

Результаты поиска

Содержание TS4240

Отзывы: