![background image](http://html1.mh-extra.com/html/royal/azury/azury_operating-manual_1494095011.webp)
11
GB
2 Operation
2.3
Switching off
1.
Switch off the cylinder vacuum cleaner with the on/off switch (Fig. 12/1) and pull the plug from the mains
socket.
2.
Keep the plug in your hand.
3.
Push the cord retracting button (Fig. 12/2) to retract the power cord.
2.4
Transportation and storage
It is recommended to retract the telescopic tube before transporting or storing the appliance.
To
transport
the appliance you can carry it by the carrying-handle (Fig. 12/3) or by the carrying-hole
(Fig. 13/B1).
When
interrupting work
you can hook the parking-hook into one of the parking-brackets (Fig. 13/A, arrow).
For
storing the appliance
you can hook the storage hook onto the storage bracket (Fig. 13/B, arrow).
For
long-time storage
remove the dust filter bag
Z
chapter 2.5, „Changing the dust filter bag“
and dispose ot
it properly. Always store the appliance in a cool, dry place and keep it out of reach of children.
2.5
Changing the dust filter bag
Change the dust filter bag when the filter bag change indicator (Fig. 14/1) lights up and before prolonged
storage or re-shipping.
For hygienic reasons, change the dust filter bag at least once every three months.
1.
Switch off the appliance and pull the plug from the mains socket,
Z
chapter 2.3, „Switching off“
.
2.
Open the dust compartment cover by pressing its release catch (Fig. 14/2) and then lifting it up.
3.
Lift the dust compartment cover until it locks in the highest position and stays open by itself.
4.
Grasp the cardboard shield of the dust bag in the middle of its upper edge (Fig. 15/A).
5.
Pull the cardboard shield up and out (Fig. 15/B). The flap will automatically close the opening completely
when the dust bag is pulled out.
6.
Just keep on pulling to remove the fully, safely closed dust bag.
7.
Remove any dust that may have collected in the dust compartment.
8.
Take this opportunity to check the motor protection filter as well. Change it if necessary
Z
chapter 3.2,
„Cleaning / changing the motor protection filter“
.
9.
Insert the new filter (Fig. 16):
- Make sure that the flap that closes the dust bag shows downwards.
- Slide the dust filter bag into the two guide rails provided for this purpose.
- Then push down the dust filter bag until the upper edge of the cardboard shield flushes with the edge of
the filter bag holder (Fig. 16, arrows).
10.
Close the dust compartment cover. It clicks shut audibly.
WARNING:
Danger of injury! During uncontrolled retraction the power cord can whip around, become an obstacle or
overthrow objects. Therefore keep the plug in your hand and guide it during retraction of the power cord.
2
3
12
ATTENTION:
Never store the appliance next to heat sources (e.g. stoves or radiators). Avoid exposing it to direct sunlight.
Heat can damage the appliance.
A B
13
ATTENTION:
Switch off the appliance before changing the dust filter bag. This will prevent dust from damaging the
appliance.
NOTE:
If the dust compartment cover does not stay open by itself, it is recommended to first disconnect the suction
hose. To do this, push both release buttons (Fig. 14/3) and pull the hose out of its socket.
NOTE:
You can dispose of the contents of the dust container with your regular domestic waste as long as it does not
contain any substances not permitted in domestic waste.
NOTE:
The dust compartment cover can only be closed if the dust filter bag is installed correctly.
14
A
B
15
16
M7099.book Seite 11 Montag, 8. November 2010 5:10 17