Alpha 600/601 User’s Guide
21
Using the Counterfeit Detector Feature
authenticity of a US dollar bill without the use of very high-end,
sophisticated testing methods and devices.
Programming the UV Light
You can program the UV light to stay on for a certain number of seconds
while you view the currency.
You can use the default which is pre-programed to “00” seconds and
works according to the previous instructions.
You can also program a number from “01” to “99” that represents the
number of seconds the light stays “on” after you press the UV light button.
Then the light automatically turns itself off after the programmed amount
of time.
To program the UV light
1
Put the key marked PRG in the Mode key slot and turn to PRG. For
more information about programming the cash register, see Setting Up
Your Cash Register - the Basics on page 22 and Setting Up Your Cash
Register - Advanced on page 40.
2
Using the round number keys, enter the
number
of seconds (from 01 to
99) you would like the light to stay on.
3
To save your setting, press the
#ST/NS
key.
The button now only works to turn the light on. It does not work to turn
the light off.
If the button is pressed when the light is off, then the light turns-on for the
number of seconds that you have set. If the button is pressed again while
the light is on, the light timer resets, and the light stays on for the full
number of programmed seconds.
