background image

 

48 

LIMITED WARRANTY 

__________________________________________________________________ 

 
 

 

ROYAL ELECTRONIC CASH REGISTER LIMITED WARRANTY

 

 
 
ROYAL Consumer Information Products, Inc. (Royal) at 379 Campus Drive, Somerset, NJ 08875 warrants that your 
NEW  Royal  Cash  Management  System  is  free  of  defects  of  workmanship  and  materials.    If  there  is  a  defect  or 
malfunction of this cash register, Royal will repair the cash register free of charge as follows: 
 
PARTS:   New or comparable rebuilt parts in exchange for defective parts for ONE YEAR from the date of purchase. 
 
LABOR:    All labor charges incurred  for 90 DAYS are covered from the date of purchase.   Cash  register  must  be 
sent postage prepaid and insured to Royal.  Royal will pay return postage during labor warranty period only. 
 
This warranty does not apply to persons who purchase this product second hand or used. 
 
This warranty does not include adjustments, parts, or repairs required by circumstances beyond the control of Royal, 
including  but  not  limited  to  fire  or  other  casualty,  accident,  neglect,  abuse,  abnormal  use,  or  battery  leakage 
damages.  THERE ARE NO OTHER EXPRESSED WARRANTIES EXCEPT AS STATED HEREIN.   AFTER THE 
PERIOD  OF  EXPRESSED  WARRANTY  SET  FORTH  HEREIN,  THERE  ARE  NO  EXPRESSED  OR  IMPLIED 
WARRANTIES  AND  THOSE  EXCLUDED  INCLUDE  THOSE  OF  MERCHANTABILITY  AND  FITNESS  FOR  A 
PARTICULAR PURPOSE.  Royal shall NOT be liable for CONSEQUENTIAL DAMAGES resulting from any failure, 
defect,  or malfunction of this cash register.  Some states do not allow limitations on  how  long  an  implied  warranty 
lasts and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above 
limitations or exclusions may not apply to you. 
 
TO OBTAIN SERVICE UNDER THE TERMS OF THIS WARRANTY: 
 
• 

Pack your cash register in the original carton or equivalent. 

• 

Enclose a copy of the bill of sale or other documentation showing original purchase date. 

• 

Enclose a card or note describing the difficulty you have had with the cash register.   

 Be sure to include your complete name and address. 
• 

Mail the above prepaid and insured to the nearest authorized service location.  The Service Center cannot be 

held responsible for any loss or damage in transit. 

 
 For Authorized Service Centers within your local area, please call 732-563-9944 or toll free 1-888-261-3888. 
 
Please retain proof of purchase to establish date of original purchase. 
 
Your warranty starts with the date of original purchase.  This warranty gives you specific legal rights, and you may 
also have other rights which vary from State to State. 
 
• 

This warranty is valid only on cash registers purchased, delivered and used in the United States and Canada. 

 
                                      
                                     
                                           
                 
                                 
                               
 

 

Содержание 130cx

























































Отзывы: