![background image](http://html.mh-extra.com/html/royal/115cx/115cx_owners-manual_1493921016.webp)
10
1. Turn the control key to the "open" position, open the printer cover as described on Page 10 and move the control
switch to the "R1 or "R2" position.
2. Remove the battery cover, located at the back of the printer mechanism. (Figure B).
3. Position the batteries as indicated (Figure C) making sure that the positive and negative poles are aligned correctly.
4. Replace the battery cover by sliding down in position. (See Figure D).
5. Close the printer cover.
THE POWER SYSTEM
__________________________________________________________________
THE 115cx register is portable and can be operated in remote locations, away from a power outlet, by using
4
C-size batteries
(not included). Examples are: kiosks, craft fairs, flea markets, or in areas where power outlets are not easily accessible. The
register can also be operated and powered by an AC adapter and one is included along with the standard supplies in this
package.
During cash register operations, all transaction data for the management report is stored in the register's memory. The memory
also holds all the optional program information. The memory back-up system keeps this information stored in memory when the
cash register is turned off.
The memory is protected by 4 standard "AA"-size (1.5-Volt) batteries that should be installed before programming the register.
Always connect the register to a power outlet
BEFORE
installing the 4 AA batteries. Batteries are not included with the 110cx
register. These must be purchased separately.
This register does not come with the 4 "AA" batteries which, when properly installed, provide back-up power to the register
memory if the power cord is accidentally disconnected or if a power interruption occurs. The daily transactions and locked in
grand total will be retained by the machine without (AC) power because of the memory protection feature. Average battery life
protection is approximately 30 days after power interruption.
TO INSTALL OR REPLACE BACK -UP BATTERIES:
NOTE: It is important that the unit is plugged in before the batteries are installed.
NOTE: In order to assure continuous battery back-up protection, it is important that the batteries be changed at least once
every year.
TO INSTALL OR REPLACE BATTERIES FOR PORTABLE USE:
With the register in the OFF position, open the compartment at the back and to the left of the register. You'll see a battery
diagram for proper installation of the 4 C batteries. Simply follow the diagram and install the batteries. To conserve battery
life, when not necessary, use the AC adapter for power. Also on the back of the register, there is a connection for the AC
adapter and the "power brick" is plugged into a power outlet.
Содержание 115cx
Страница 3: ......
Страница 6: ...APPENDIX 1 CALCULATING STATE TAX TABLE CODES 49 ...
Страница 13: ...7 ...