14
9.2. COLD LAmINATING
1. Thread the cold film in accordance with the illustration and instructions 6.2 on
page 8.
2. Set pressure lever to the proper position according to your laminating application..
3. Set the laminator to cold by pressing the
button, set proper speed by
using the
and
button.
4. It is
when ready is dispalyed.
5. Center the document on the table.
For ease and convenience set the
document guides in position
6. Press the"RUN "button.The liner take-
up and film will roll at the same time.
The liner take-up device may be
adjusted by turning the adjustment
knob.
7. When lamination is completed, press the
button.
10. Set pressure lever at the "OPEN" mode.
11. Turn off the power switch.
