Royal Sovereign RSC-1400LS, Руководство по обслуживанию

Страница: 13 / 42

4.1 Adjusting Take-Up Shaft Speed
1. Main rollers and Take-Up Shaft speed is not synchronized.
1. Use a hand to loosen (increases speed) or tighten (reduces speed) the bolt. Figure 1
4.2 Adjusting Front Roller
.
30 ~ 36
37 ~ 42
on the gauge
when the machine is running, check that
the top and the bottom films are fed in
without any wrinkles.
11
CAUSES:
MEASURES:
Pressure
• Use 5/16” or 8mm Allen wrench
to adjust the roller pressure:
Clockwise – Increase pressure.
Counter Clockwise – Decrease pressure.
1. Using Push-Pull Scale , measure
4. Check above steps 2 through 3 with
5 spots as shown on Figure B &C:
Front roller should read between6-7
2. Checking for over all tension –
4. Adjustments
with different thickness of substrates.
3. Laminating Test – Laminate samples
1.5mil & 5mil films.
Figure B
Figure C
Figure A
Clockwise
Counterclockwis
Figure A
Figure 1
Decrease
Increase