![background image](http://html1.mh-extra.com/html/vivid/peak-pi-320/peak-pi-320_product-instruction-manual_1038725001.webp)
1. POWER SWITCH
2. POUCH ENTRANCE
3. OPERATION TOUCH PANEL
4. POUCH EXIT
5. POWER SOCKET
6. POWER CABLE
Warning: Thank you for purchasing the Peak Instant PI-320. Peak laminators are designed to give you professional,
high quality results, quickly and easily. Please take a few minutes to read through this important document
as any damage caused to your laminator by user error is not covered under warranty.
SETUP
1. Always operate the machine on a flat and stable surface.
2. Ensure there is enough space at the rear of the machine to exit.
3. Ensure that you are using the correct voltage AC240V/50Hz, the voltage information should relate to the rating
panel on the machine.
Max. entrance width
330mm
Max. laminating pouch thickness
0.6mm
Power voltage
AC240v/50Hz
Power consumption
1600W
No. of rollers
4
Pre-heating time
1-minute
Machine size
506 x 156 x 86 mm
Machine net weight
3.15kg
Supported pouch thickness
75mic 100mic 125mic
Speed/min
800mm/min
OPERATION DESCRIPTION
x
When using electrical appliances, basic precautions should be followed to reduce the risk of injury or electric shock,
including the following:
What is a ‘Lifejacket®’?
The Lifejacket® is a highly durable patented product made from Teflon® that should be used when laminating cut-up, odd
shaped pieces (such as shapes, letters, signs as show above) to prevent damage to your laminator and potential jamming.
Why use a Lifejacket®?
. Protects your laminator from jamming
. Extends the life of your laminator by using the Lifejacket® - stops adhesive seeping onto
the rollers
. Eliminates repair bills as this product keeps your laminator working at an optimum level
. Available in A4, A3 and A2 sizes to protect documents of all sizes
Ask your supplier for more details.
Please note, if you do not follow the safety guidelines above and your laminator breaks, you will not be covered under
warranty.
Don’t overlap
Leave an even border
Don’t laminate open
HQGÀUVW
1HYHUODPLQDWHFXWXSSLHFHV
ZLWKRXWXVLQJD/LIHMDFNHWRU\RX
ULVNMDPPLQJDQGGDPDJLQJ
\RXUODPLQDWRUWKLVZLOOQRWEH
FRYHUHGXQGHUZDUUDQW\
x
x
CAUTION
Operation Method:
1. Turn on the power switch and choose
the suitable pouch thickness. When
light is on then you can start.
2.
Use the correct size pouch
for the work being laminated
and feed sealed edge first
NB. For laminating different pouch thicknesses, the speed remains the same but the temperature varies.
1.
After switching on the machine do not power off within 1-minute.
2.
Always unplug the appliance when not in use.
3.
The laminator will become hot in use and care should be taken when using the machine.
4.
Do not immerse the power cord, plug or appliance in water or other liquids or use near water.
5.
Do not insert any metal objects or other foreign objects such as hair, fingers or clothing into the appliance.
6.
Remove paper clips and staples before laminating.
7.
Only laminate paper or board. Do not laminate unusual objects.
8.
Do not spray anything into or lubricate the
machine
.
9.
It is normal to hear the sound of the motor running during operation especially when using a 75 mic pou
ch
10.
Avoid use in direct sunshine or with other intensive light source