RSC-820CL
11
Figure 2
Figure 3
10. Thread the craft paper behind the Lower Idle Bar to
the top film that is resting on the main roller (do not
use the Lower Idle Bar for Mounting). (Figure 6)
Figure 5
6. Thread the top film underneath the Upper Idle Bar.
(Figure 2)
7. Tape the top film on to the Release Liner Take-Up.
(Figure 2)
8. Cut and separate the release liner and the film.
(Figure 3)
9. Make the craft paper pass the support idle bar and round
the lower idle bar.(Figure 4)
Figure 4
