38
6 operation
Set the cash register to Registration mode REG when in standard operation
Note: The information below applies for the following subchapters: the cash register is always programmed to 2 decimal places (default setting).
OFF
PRG
REG
X
Z
• Set the key to REG
Display
19-01-2011 17:30:30
0.00
6.1 Clearing error messages
In the case of input errors or exceeding limit values, the cash register issues an error status: An acoustic signal is issued and an "E" (Error) appears in the display. Press the
CLR
key to clear the
error message.
6.2 Registering departments
No decimal point is set when entering prices. The cash register sets the decimal point automatically according to system option 1 (decimal point position).
6.2.1 Single DP registration
e.g. Your business sells an item or a group of items always at the same price (shoes). You therefore want to set a fixed price to a specific department so that the clerk
simply presses a specific department and the price is fixed.
Example: $100.50 should be registered to Department 1.
OFF
PRG
REG
X
Z
• Set the key to REG
• Enter the price (without decimal point, with
decimal places).
• Press the relevant department key.
Input
1
P Q R S
0
„ #
0
„ #
5
J K L
0
„ #
1/15/29
Note: If a department is pre-programmed as a department with a fixed price, no price needs to be entered during registration. After pressing the relevant department key, the fixed price is
automatically registered.
6.2.2 Multiple DP registration
Multiple DP Registration may be desired in some instances. One example may be that you typically sell fruits by the kilogram. You may want to enter a weight of 2.2
kilograms at a fixed price of 79 cents.
OFF
PRG
REG
X
Z
• Set the key to REG
• Enter the quantity.
• Press the multiplication key
X
.
• Enter the price (without decimal point,
with decimal places).
• Press the relevant department key.
Input
2
T U V
•
DEL
2
T U V
X
7
@
9
D E F
2/16/30
• The quantity of goods can a value between 1 and 9999.