
RCR-75CA
35
• Continue programming the text as described.
CLR
etc.
• Conclude programming by pressing the
SUB-TOTAL
key.
SUB-TOTAL
5.18 Programming the end lines(e.g. entering your gSt#)
The end lines on the receipt can contain up to 3 lines and a maximum of 32 characters per line.
Three end lines are already pre-programmed.
• If you do not want to print end lines, you can delete the pre-programmed end lines.
• Refer to Chapter 5.2 for information on entering text.
• Text lines which are not programmed are not printed.
OFF
PRG
REG
X
Z
• Set the key to PRG
• Select program number 32
• Confirm by pressing
CASH
Input
Display
3
W X Y Z
2
T U V
CASH
=AD MEASSAGE - 1=
********************************
THANK
********************************
The programmed end lines appear in the display. The end
line is already selected.
For further details, refer to Chapter 5.17.
5.19 Selecting a graphical logo
You can print a graphical logo above the logo message on a receipt.
There are 23 motifs available for selection, refer to Figure 1.
OFF
PRG
REG
X
Z
• Set the key to PRG
• Select program number 44 (refer to Chapter 5.1.2).
• Confirm by pressing
CASH
The factory default setting is preset to 0. e.g.no graphical
logo is printed.
Input
Display
4
G H I
4
G H I
CASH
=GRAPHIC LOGO - 1=
[0] STATUS
• Enter the number of the graphical logo you want to
print in the input area, e.g Figure 17
• Confirm by pressing
CASH
.
1
P Q R S
7
@
CASH
• Conclude programming by pressing the
SUB-TOTAL
key.
SUB-TOTAL