RBC-2200-CA
9
Error code
Malfunction causes
Solutions
E10
Ambient light is too high
Lower the ambient light
UV sensitivity light is too high
Lower the UV light
E11
The plastic button is broken
Replace button
EE1
The fake bill reflecting fluorescence is being
checked out by UV - USA Setting Only
Take out the first bill (fake bill) in the stacker then press
[reset] to continue counting and detecting
EE2
The fake bill without magnet is being checked
out by MG - USA Setting Only
Take out the first bill (fake bill) in the stacker then press
[reset] to continue counting and detecting
EE3
Currency other than Canadian detected
Remove Foreign currency in the stacker, then press RESET to
continue counting and detecting
EE4
The half bill is being checked out
Take out the half bill in the stacker, then press [reset] to
continue counting &detecting
The left (right) counting sensor is dirty or broken
Replace counting sensor
EE6
The fake bill with different located magnet is
being checked out by MG - USA Setting Only
Take out the first bill (fake bill) in the stacker then press
[reset] to continue counting and detecting
EE8
the bill width size is over 5mm larger than
the real USD bill size - USA Setting Only
Take out the first bill (fake bill) in the stacker and press
[reset] to continue counting and detecting
EE9
Two bills are counted as one / inaccurate counting Fasten the adjustable screw clockwise
