background image

SAFETY INSTRUCTIONS

When using this machine follow these basic safety precautions to reduce risk of fire, electric shock, or injury.

WARNING 

1.

Only use the power cord that comes with the machine.  Using a different power cord may result in

 

electric 

shock, fire, or cause serious damage to the machine. Plug the power cord into a properly

 

grounded wall outlet.

2.

Do not use the machine if the power cord is damaged. This may result in electric shock, fire, or other

 

hazards.

3.

Do not place the machine in an area where it may be exposed to water or other liquids.

4.

To reduce the risk of electrical shock, do not take apart the machine. When service or repair is needed

 

bring 

to a qualified service repair technician.

5.

When unplugging the power plug, grip the plug to pull it out.  Pulling the cord may result in electric

 

shock, fire, 

or damage to the machine.

6.

Do not place objects on the power cord and do not bend it excessively. This may result in electric

 

shock, fire, 

or other hazards.

CAUTION 

1.

Before dusting the machine with a brush,  unplug the machine from the wall. Do not use liquid or

 

aerosol

cleaners on the machine.

2.

Do not use the machine in areas with high temperature or high humidity. This may result in the machine

 

not 

working properly.

3.

When not using the machine for long periods of time, unplug the power cord from the outlet.

Read & Fully Understand This Owner’s Manual Before Using This Machine. 

2

Содержание RBC-1003BK













Отзывы: