PRODUCT OPERATION
1. Place the water dispenser on a level surface.
2. Insert the water bottle vertically through the water funnel
3. Push the both hot water and colder water buttons until water flows out
4. Plug the water dispenser into a grounded power outlet. The yellow LED will turn on.
5. Turn on the Hot Water switch on the back of the unit into the ON position. Next, turn the Cold
Water switch into the ON position. DO NOT TURN ON BOTH SWITCHES AT THE SAME TIME.
Once this is completed both cooling and heating indicator lights should light up.
6. After both switches are turned on, it is recommended that you wait 30 minutes before usage.
After 30 minutes, the water dispenser will be ready to dispense hot, cold, and room temperature
water.
7. It is recommended that if the Hot Water option is not used, the Hot Water Switch (Red) be
turned OFF. This will help conserve energy.
8. It is recommended that if the water dispenser is not to be used for an extended period of time,
the water tank should be drained.
NOTE: The appliance is designed to provide hot or cold water whenever you need it. It will
automatically turn on and off when hot and cold water reaches the factory set temperatures.
7
