ROYAL PRESTIGE
PRESSURE COOKERS®
10
CONDITION
REASON
SOLUTION
Steam is escaping from the
safety valve.
• The regulator valve is not
functioning properly.
Follow these steps, in order:
1. Turn off the heat source immediately.
2. Rotate regulator valve to decompression position
3. The indicator pin should go down.
4. If the indicator pin does not go down, do not
attempt to open the pressure cooker.
5. Once the indicator pin has gone down, open your
pressure cooker and examine the safety devices;
–If they are obstructed, clean them. You can then
start using your pressure cooker again. If the
problem persists, contact the Royal Prestige
®
Service Center.
–If the safety devices are unobstructed or if you
are in doubt, return your pressure cooker
immediately to the Royal Prestige
®
Service Center
(see back page).
The pressure cooker
was heated empty
• No liquid was put in the
pressure cooker before placing
on heat source.
• Do not move the pressure cooker, to avoid
damaging the base.
• Turn off the heat source and let the pressure cooker
cool down where it is. We advise you to change the
lid gasket and have your pressure cooker checked
by the Royal Prestige
®
Service Center.
The lid gasket of the pressure
cooker has come out of the
pressure release window in the lid.
• The other safety devices are
not working.
• Remove from heat source.
• Rotate regulator to pressure release position
• Remove the lid and clean cooker out.
• Do not reuse the pressure cooker before having it
checked by the Royal Prestige
®
Service Center.
Steam is escaping from the
regulator.
• This is supposed to happen
and is completely normal.
• Turn down the heat source to minimize steam
release and continue cooking.
