Royal Enfield Himalayan, Руководство по обслуживанию, Страница: 55 / 214

ROYAL ENFIELD HIMALAYAN BS III VEHICLE SERVICE MANUAL
54
S.
No.
Fastener, Size, Tool Usage, Precautions, Photos
Aggregate to Assemble/
Instructions
6.4 Throttle cable
Assembly at Handle
bar end

Route throttle cable
inner through the
bottom half of the
throttle rotor housing.

Insert throttle rotor on
handle bar RH and locate
inner cable in the rotor
eyelet

Support bottom half of
the throttle rotor
housing against handle
bar and ensure proper
resting of throttle rotor
on top of the housing.

Position top housing
over bottom housing,
ensuring the mounting
holes are matching and
the throttle rotor is
located in the slot in the
housing and rotates freely.

Locate long head screw
in front mounting hole
and the short screw in
rear mounting hole of
bottom housing and
tighten evenly till the
housing are firmly
tightened against
handle bar.

Locate throttle cable
stop plate on outer cable
and tighten to bottom
housing with screw.

Route the throttle cable
below fuel tank and strap
properly to frame.
NOTE:
Ensure free rotation of the
throttle rotor in handle
bar.
NOTE:
Ensure free movement of
throttle rotor and cable
before tightening the
screws fully.
Philips head screw driver