32
OPERATION OF CONTROLS
CLOCK SETTING
NEVER attempt to operate the select or reset buttons while riding the motorcycle. Failure to do so may cause loss of
concentration and unstable riding, leading to a potential accident, resulting in serious injury to both rider and other road
users, besides causing severe damage to the motorcycle.
WARNING
Function
SELECT & MODE pressed
with No Speed input
Switch
Pressure
time (sec)
Action
CLOCK
SETTING
MODE
> 3 sec
In ignition key ‘ON’ position (when vehicle not running) Enters into clock setting mode
and hour digits starts to blink
< 1 sec
SELECT
Hours value shall increment by 1 accordingly for no of press
> 3 sec
SELECT
Hour value saved and minute digits starts to blink
< 1 sec
Minutes value will increase by 1 by each press of the “Select’ button
> 3 sec
Minute value save and PM/ AM digits starts to blink
< 1 sec
PM / AM is interchangeable by each press of the “Select’ button
> 3 sec
PM / AM save and exit from clock set mode
SELECT
SELECT
SELECT
SELECT
Auto exit without saving changes and continue with previous setting
20 sec
NO ACTION
