7. IMPORTANT! The appliance has an overheat
protection device. If the appliance overheats during
operation, it will immediately turn off. It is then
necessary to wait until the appliance cools down and
reset the overheat protection. To do this, remove
the button guard (unscrew and remove) and press
the “RESET” button. Re-install the button guard. The
appliance can be used again.
8.
Used oil must be cooled down to room temperature
and then it can be drained using the drain tap.
IMPORTANT: When the appliance is filled with oil to
the maximum level, the maximum allowed side shelf
load is 10 kg.
3.4. CLEANING AND MAINTENANCE
a) Before each cleaning, adjustment, replacement
of accessories and if the device is not used, it is
necessary to disconnect the power plug and cool the
device completely.
b) Use only mild detergents suitable for washing
surfaces which come into contact with food to wash
the device.
c)
Do not use water to wash the electric control panel as
this may cause damage and invalidate the warranty.
d)
After cleaning the device, all parts should be dried
before using it again.
e)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f)
Never spray the device with water jets.
g)
Regular inspections of the device must be carried out
in terms of its technical efficiency and any damages
h)
Use a soft cloth for cleaning.
6.
Always make sure that the thermostat is set to „0”
after frying is finished.
EN
NOTES
4
5
Rev. 04.03.2021
Rev. 04.03.2021
