Royal Alloy Grand Prix 150, Руководство по эксплуатации

Страница: 39 / 48

38
For front and rear disk brake model
Grade: DOT4.1
Note:
1. Only DOT4.1 glycol-based hydraulic brake fluid is equipped in
this vehicle. Do not mix with silicon-based or oil-based brake
fluid. This will damage the hydraulic brake system.
2. Do not use residual fluid from a previously opened container.
Brake fluid can easily absorb unwanted moisture from the
atmosphere.
3. Do not over-fill or spill brake fluid onto painted surface
.
Check tyre inflation pressure and tyre tread condition. For maximum
safety and good tyre life, the tyre pressures should be inspected on a regular
basis particularly before long journeys or with passengers.
Tyre Pressure
Insufficient air pressure in the tyres not only increases tyre wear but also
seriously affects the stability of the scooter. Under-inflated tyres make smooth
cornering difficult and over-inflated tyres decrease the amount of tyre in
contact with the ground, which can lead to skids and loss of control. Be sure
that the tyre pressure is always within the specified limits. Tyre pressure
should only be adjusted when the tyres are cold.
Cold Inflation Tyre Pressure
Front Wheel 29 psi
Rear Wheel 32 psi
Caution
² Tyre inflation pressures and general tyre conditions are extremely
important to the proper performance and safety of the scooter.
Check your tyres frequently for both wear and correct inflation
pressures
Hydraulic Brake Fluid
Tyres
Inspection and Maintenance