INSTALLATION MANUAL
GRAND BOX
INSTALLATION
CLEANING
PLACING
x 4
KG
TIGHTENING
LOCK MECHANISM
17 mm
13 mm
13 mm
1
2
1. If required, cut the plastic cover of
truck edge.
2. Clean upper surface of truck edge
with a dry and soft fabric.
NOTE: Never use any chemical
components for cleaning.
3. Place the cap on to the truck edge
with 4 persons.
4. Align each corner of the cap
individually.
5. Make sure protrusions at the sides
have the same length.
NOTE: Check your product weight from
the table before lifting.
6. Place fixing clamps.
7. Tighten the bolts respectively.
Make sure the cap DOES NOT
move and the distances between A
- B and C - D are the same.
NOTE: Check the tightness of the
bolts according to maintenance
procedure.
1. Adjust the position of rear door
latches by 13mm. wrench tool.
2. Adjust and align with rotary lock
system.
