background image

BEFORE USE CHECK FOR LEAKS

Never check for leaks with a naked flame, always use a soapy water solution

Gas Cylinder

Connection to Appliance / Change of Gas Cylinder

The gas cylinder should not be dropped or handled roughly! If the appliance
is not in use, the cylinder must be disconnected. Replace the protective cap
on the cylinder after disconnecting the cylinder from the appliance.
Cylinders must be stored outdoors in an upright position an out of the reach
of children. The cylinder must never be stored where temperatures can
reach over 50C. Do not store the cylinder near flames, pilot lights or other
sources of ignition. DO NOT SMOKE.
This barbecue is designed for use outdoors, away from any flammable
materials. It is important that there are no overhead obstructions and that
there is a minimum distance of 1m from the side or rear of the appliance. It
is important that the ventilation openings of the appliance are not
obstructed. The barbecue must be used on a level, stable surface. The
appliance should be protected from direct draughts and shall be positioned
or protected against direct penetration by any trickling water (e. g. rain).
Parts sealed by the manufacturer or his agent must mot be altered by the
user. No modifications should be made to any part of this barbecue and
repairs and maintenance should only be carried out by a registered service
engineer.

Do not obstruct any ventilation openings in the barbecue body. Position the
gas cylinder on level ground next to the barbecue and safely away from any
source of heat. Should you need to change the gas bottle, confirm that the
barbecue is switched off, and that that there are no sources of ignition
(cigarettes, open flame, sparks, etc.) near before proceeding. Before
connection, en sure that there is no debris caught in he head of the gas
cylinder, regulator, burner and burner ports.
Spiders and insects can nest within and clog the burner/venturi tube at the
orifice. A clogged burner can lead to a fire beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner.
Fit the hose to the appliance using a spanner to tighten it onto the
connection thread. If the hose is replaced it must be secured to the
appliance and regulator connections with hose clips. Disconnect the
regulator from the cylinder (according to the directions supplied with the
regulator) when the barbecue is not in use.
The Barbecue must be used in a well ventilated area. Do not obstruct the
flow of combustion air to the burner when the barbecue is in use. ONLY USE
THIS BARBECUE OUTDOORS.
The gas cylinder should be placed upright on its bottom on level ground and
should NEVER be stood on the trolley base and placed directly under the
barbecue.

10

Содержание GB7540S
















Отзывы: