Rowley NS11, Инструкция по эксплуатации и обслуживанию

Страница: 7 / 11

7
6. Hold the pusher fi rmly in one hand, with the other hand,
slightly stretch the spring, bend slightly, and hook the
spring onto the hook in the magazine cover slot
(Fig. 14) . be careful not to over stretch the spring.
Fig. 14
7. Now one end of the spring is connected to the hook
in the magazine cover slot (Fig. 15-(1)) and the other
end goes around the tension roller and hooked on to
the pusher (Fig. 15-(2)) .
Slide the magazine cover on the stapler while
pressing the magazine latch (Fig. 9)
Replace the bracket and fasten in the screw (Fig. 8) .
How to Replace Other Parts
With use, some parts may break or
wear out. See the table below for stock
numbers of most replacable parts.
Order Lubricant Syringe (AS65) also.
AS65 will be used in the following steps.
NSG10 NS11
Piston NSG10/P15 NS11/P13
Bumper NSG10/P16 NS11/P14
Washer NSG10/P19 NS11/P17
Metal Washer NSG10/P20
no metal washer
Stapler
Parts
1. Unscrew the three bolts as shown in Fig. 16.
To remove the screw at the back end of the stapler,
use a wrench to keep the nut from spinning (Fig. 17) .
Fig. 15
Fig. 16
(2)
(1)
Piston
Bumper
Washers
Fig. 17