4
UK
Telephone Helpline: 0845 146 2887
• Rowlett recommend that
this product is connected
to a circuit protected by an
appropriate RCD (Residual
Current Device).
Introduction
Please take a few moments to carefully read
through this manual. Correct maintenance and
operation of this machine will provide the best
possible performance from your Rowlett product.
The appliance is only intended for frothing and
heating milk. Do not use it for anything other than
intended use.
Pack Contents
The following is included:
• Milk frother
• Power base
• Instruction manual
Rowlett prides itself on quality and service,
ensuring that at the time of packaging the contents
are supplied fully functional and free of damage.
Should you find any damage as a result of transit,
please contact your Rowlett dealer immediately.
Before first time use
1. Clean the appliance thoroughly (See section
“Cleaning, Care & Maintenance”).
2. Get to know the paddles:
Mixing
paddle
For mixing milk during
heating
Frothing
paddle
For frothing milk
3. Get to know the milk level marks:
Maximum capacity for heating milk: 300ml
Minimum capacity for heating or
frothing milk: 75ml
Maximum capacity for frothing milk: 150ml
Operation
Note for all functions:
Ensure to let the appliance rest for a
Minimum of 3 minutes between two
consecutive cycles, or the appliance will
enter self-protection state automatically
after working for 5 cycles continuously. The
working indicator will flash and the motor
will not run. After about 5 minutes, the
appliance will enter standby and be ready
for use again.
Frothing and heating function
1. Remove the jar from the base.
2. Open the cover. Then mount the frothing
paddle onto the shaft inside the jar.
3. Fill the jar with milk below the “
MAX
” mark
(150ml). Then close the cover.
4. Place the jar on the base then connect jar to a
mains power supply.
5. Press the heating button
once. The
heating indicator light turns On and the
appliance starts to work.
•
Note:
If desired, you can press the heating
button
again to halt operation.
6. Once completed, the appliance stops working
automatically.
DE401_UK_A5_v1_20210512.indb 4
DE401_UK_A5_v1_20210512.indb 4
2021/5/12 16:21
2021/5/12 16:21