Rowenta ECLIPSE QU506 Series, Руководство пользователя

Страница: 6 / 57

EN
10 11
INSTALLATION
1 Remove the air inlet grid.
3 Remove the protective film
of the particle filter.
5 Install the pre-filter.
Align the slot position at the bottom, and
buckle up the upper U-shaped buckle.
6 Install the air inlet grid.
Align the upper two buckles and
press them tightly, then press the
two sides at lower part, slowly and
gently buckle the air inlet grid.
4 Install the particle filter.
2 Take out the pre-filter.
Press the raised part on both sides
to pull it outwards, and take out the
pre-filter.
Buckle
Buckling
position
7 Plug power supply.
INSTRUCTIONS
Control panel
Remote control
Screen
1. Fan Mode
2. Auto Night Mode
3. Speeds / Temperature / Timer /
Delayed Start
4. Auto Day Mode
5. Filter replacement indicator
6. Heater Mode
1
2
4
5
6
3
1. Oscillation
2. ON/OFF
3. Speeds / Temperature / Timer / Delayed
Start
4. Auto modes
5. Fan / Heater Mode
6. Timer/Delayed Start
AAA Battery, 1.5 V
Battery
1
2 3 4 5 6
Use alkaline batteries of type «AAA».
2 batteries are included with the appliance.