27
3 • Storing and transporting
the appliance
After use, stop your appliance by pressing on
the on/off pedal and unplug it
(fig.6)
.
Replace the cable by pressing the automatic
cord winder pedal
(fig.7)
.
Thanks to its carrying handle, your vacuum
cleaner is easy to move around
(fig.8)
.
When you tidy away your vacuum cleaner
(always in the horizontal position
(fig.9)
,
you can place the tube in its storage space to
the rear of your appliance in the storage
position
(fig.10)
.
IMPORTANT
Always turn off and unplug
your appliance before maintenance or
cleaning.
CARE AND CLEANING
1 • Emptying the dust collector
Empty the dust box as follows after each use
and/or cleaning of the HEPA filter:
• Press the “eject” button to unlock the dust
box
(fig.11)
.
• Remove the dust box and place it above the
dustbin
(fig.11)
.
• Press the “push” button on the dust box
and empty it
(fig.12)
.
• Clean the seals of the dust box using a dry
cloth
(fig.13-14-15)
.
• Again close the dust box and replace it on
the appliance
(fig.16)
.
CAUTION
Do not fill above the max. level
shown on the dust compartment.
2 • Automatic cleaning of the
HEPA filter
If your vacuum cleaner is equipped with the
HEPA automatic cleaning system, cleaning
will be automatic and requires no
intervention from you. It will start if
necessary on plugging in your vacuum
cleaner.
If your vacuum cleaner produces a clicking
noise during cleaning, this is completely
normal
(fig.17)
.
IMPORTANT
Then empty the dust box.
REMARK
If you notice weaker suction
from your appliance, you can impose HEPA
filter automatic cleaning. To do so, stop your
appliance and press the on/off pedal twice in
succession with your hand
(fig.18)
after
each cleaning cycle.
CAUTION
Do not operate the vacuum
cleaner without the filtration system (pts 2, 3
and 4).
IMPORTANT
Never stow your vacuum
cleaner in the vertical position
(fig.9)
.
*Depending on model:
this is either equipment specific to certain models or available as an optional accessory.
ROWENL19-735361:CLEAN POWER 1/07/08 15:45 Page 27
