background image

1

IMPORTANT:

Thank you for purchasing the ROVIN Cooler/Warmer. Please read the 
Caution section and instructions below carefully and familiarise yourself 
with the product before use. As with all electrical items, please exercise 
extreme caution during use and take care not to misuse or damage the 
product which could result in injury.  

CAUTION:

• 

Before use, check that the cables, plugs and casings are undamaged. 

• 

DO NOT use if any parts are damaged or worn.

• 

DO NOT use in the rain, or other wet or damp conditions. 

• 

DO NOT handle if your hands are wet.

• 

DO NOT obstruct the air flow to the unit. The ventilation slots must be kept 
clear for the unit to work properly and prevent dangerous overheating.

• 

DO NOT place the unit in direct sunlight or an enclosed space where 

ventilation is restricted, or where there are other heat sources.

• 

Avoid using in areas where the supply cable may become a trip hazard.

• 

As with all electrical equipment, keep away from children and animals.

• 

Only use with a 12V DC (negative earth).

• 

When using the coolbox with the 12V DC supply, the plug will become 

warm during use. Ensure that the vehicle socket is clean and clear of debris, 
and the electrical contact is good to avoid the plug/socket overheating.

• 

Take care when removing the plug from the 12V DC socket and DO 

NOT touch the metal contacts which may be hot.

• 

Unwind the required supply cable fully before use. DO NOT use whilst 

this cable is coiled as this can cause overheating of the cable.

• 

This coolbox is only intended for keeping foodstuffs cool. It is not 
recommended or intended for medicines or chemical storage.

• 

This coolbox is intended for temporary in-vehicle, camping, 
caravanning and leisure use. It is not a fridge designed for permanent 

installation and should not be used as such.

• 

NEVER fill the unit with water or ice. DO NOT immerse the unit in water.

• 

Disconnect the unit whilst the vehicle’s engine is not running to prevent 
the vehicle battery becoming excessively drained or flat. When the 
vehicle is running, the alternator should provide enough power.

• 

To maximise the cooling effect when the unit is disconnected, keep the lid closed.

• 

Take care when manoeuvring or lifting the coolbox as it may be heavy 

when fully loaded. Only lift if it is within your own physical capabilities.

• 

NEVER pull the plugs out of sockets using the cable, or pull on the 

cables to manoeuvre the coolbox.

Содержание GH2258









Отзывы: