7
ROVERS NORTH, INC. 1319 VT ROUTE 128, WESTFORD, VT 05494 USA www.roversnorth.com (802) 879-0032
RNGWK90
DEFENDER 90 WOOD MODEL PARTS KIT
1
/
18
th
SEMI-SCALE
REALISTIC DISPLAY
For the next step 8, prepare a surface area to sand all
the small parts. This is where the spare shoebox and or
small parts box comes in handy, especially if you have a little
helper with curious hands or are worried about losing some
of them.
Sand all 48 tread pieces on both sides, removing the
brown residue. This is super helpful when placing and gluing
the wheels together. You will also have to sand the surface of
the wheel locking rims and round wheels. This is covered in
detail on step 8.
Locate Wheel Parts
Open the small brown paper bag and sort through all the
small parts. Set aside the two mirrors, steering wheel, steer-
ing wheel column, raised air intake, two rear door hinges,
two door handles and rear bumper hitch parts.
You should be left with 48 treads pieces - place these
with the four locking wheel rims and four of each round
wheel parts. See photo above.
Each single wheel assembly comprises of the following
parts.
- Round outer discs with large center holes x2
- Round inner discs with smaller center holes x2
- Tread pieces x12
- Wheel Rim locking hub x1. This is the “wheel rim” and
also the locking part that holds each wheel to the axle. This
doesn’t turn, but the wheel does.
7
Set these exterior
parts aside,
will be used in step 17
Wheel Parts
