20
ROVERS NORTH, INC. 1319 VT ROUTE 128, WESTFORD, VT 05494 USA www.roversnorth.com (802) 879-0032
RNGWK90
DEFENDER 90 WOOD MODEL PARTS KIT
1
/
18
th
SEMI-SCALE
REALISTIC DISPLAY
Mounting Bonnet Parts
Test fit the bonnet base piece for fitment before gluing,
make adjustments as needed with the file. Make sure that
you have the
etched side facing out
with side wing top vents
showing.
Mount the bonnet base as shown above, use a few drops
of glue to fix on top of entire rim top of grille and wings, let
dry before proceeding to next step.
Test fit bonnet top into slot on bulkhead. A few millime-
ters back from the front edge (3-4mm) is the location of
where you will apply a few drops of glue to fix the front of the
bonnet down; see glue locations on (16A1).
TIP:
I prefer to place a few drops of glue directly on the
underside of the bonnet front edge so it will be hidden when
mounted.
16
A1
B
Test fit each bonnet side as shown above. Place a few
drops of glue into the slots as indicated. Use a small drop of
glue towards the front where the part is very narrow (locate
the glue in the small valley and where it has some contact
area).
- Bonnet Base (16A1) x1
- Bonnet Top x1
- Bonnet Sides x2
C
