44
Touch “SAT FINDER”
Touch “SAT SCR”
Touch “LNB TYPE” and choose the
LNB/MULTISWITCH model
Touch “SCR USER” and choose the
user number to test (USER 1-8)
Press “SPECT” to display the spectrum
or “MEAS” to start measuring
Or touch “SCR CABLE TEST” to perform in
spectrum mode the SCR LNB/MULTISWITCH 8
frequencies check (USER 1-8).
____________________________________________________
________________________________________________
To change the displayed transponders
manually, touch “STOP” and select the
wanted tp/ts. Touch “START SEARCH” to start.
If the chosen satellite is found the buzzer will start, if this does not happen, continue looking
for the right satellite. Optimize the dish alignment and skew to obtain the maximum NsMAR
value (noise margin).
N
For a proper use of the “SAT FINDER” function, verify the tuning parameters for all three
transponders (frequency, polarity, band, and symbol rate) and the type of lnb you are using
(universal or quatro)
Go to the
site for more information
