Heating & Ventilation
24
1. Air temperature control
HEATED AIR: Pull the control out.
UNHEATED AIR: Push the control in.
2. Air distribution control
Left position: Foot level vents (with reduced air supply from
windscreen vents).
Centre position: Windscreen vents.
Right position: Foot level and windscreen vents closed (fresh air
from face level vents only).
3. Blower switch
To operate the blower, the starter switch must be turned to position
’I’ or ’II’.
Position ’I’: Low blower speed.
Position ’II’: High blower speed.
Centre position: Blower off.
Fresh air enters the car through a grille at the front of the car, which
should always be kept clear of obstructions, including leaves, snow
and ice.
Operating Tip ..........
Maximum demisting/
defrosting
Select the centre position on
the air distribution control, pull
the air temperature control fully
out and set the blower switch
to II’.
Maximum heating
Select the left position on the
air distribution control, pull the
air temperature control fully out
and set the blower switch to
’II’.
Maximum ventilation
Select the left position on the
air distribution control, push
the air temperature control fully
in and set the blower switch to
’II’. Open and direct the face
level vents as required.
Operating Tip ..........
When foot and windscreen
vents are closed (air
distribution control to the
right), keep the blower switch
off.
H2170A
2
3
1
