64
USER MANUAL
TROUBLESHOOTING YOUR RO
VE™ R2-4K
Came
r
a does not turn ON
Err
or/Message “Ca
r
d Full”
Came
ra Fr
eezing
/La
gging or C
r
ashing.
Video is fuzz
y
1. User different Included USB Cable & your smart phone’s charger. Now
plug it into your home’s wall outlet.
2. When you plug it in, the camera should turn ON. If NOT, then press the
Power Bu�on Once to see if it turns ON? If it s�ll does NOT turn ON, then
remove the memory card.
3. Keep the camera plugged in. Now Press the RESET bu�on ONCE with a
pen’s �p or a paper clip. Now the camera should turn ON. If it s�ll doesn’t
turn ON, then please CONTACT US.
Guys Please TRUST US on this. If your camera is freezing, lagging or does NOT
record video a�er some seconds etc. while opera�ng: Then it is the Memory
Card Issue. Either you are using the WRONG, FAKE or BAD Memory Card.
(Please be aware of the Fake Ones out there. If you have purchased your
memory card from eBay or any third party seller online then it is most likely a
fake one, even though it looks exactly real. Please trust us. We have sold
thousands of ROVE Dash Camera’s and they do NOT lag, we stand by our
prduct and we do extensive tes�ng. Some customers simply thinks the camera
is bad or not stable, but that is NOT the case here. It’s the Memory Card Issue.
Please CONTACT US and we are dedicated in resolving this for you ASAP.
P
lease make su
r
e
t
he lens of
c
ame
r
a is
c
lean and
t
he
r
e is no di
rt
on windshield
also. If the lens is out of focus, we are extremely sorry in advance. This can be a
manufacturing defect. Please send us an email with a screenshot or a sample video
so we can get this resolved for you ASAP.
Format card by going into system se�ngs > format > 0K > Select Yes > 0K. Then
Go to Video Mode se�ngs > Loop Recording > Choose either I-min, 3-min,
5-min. This will allow loop cycle func�on to be turn ON and it will keep
recording over and over.
