OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
www.outline.it
2
DISPOSAL OF WASTE MATERIALS
Your product is designed and manufactured
with high quality material and components,
which can be recycled and reused. When
this crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by the
European Directive 2002/96/EC and subsequent
amendments. This means that the product must
NOT be disposed with other waste. It is the user’s
responsibility to dispose of their electrical and
electronic equipment by handing it over to an
approved re-processor. For more information
about where you can send your equipment for
recycling, please contact your local distributor.
The correct disposal of your old product will help
prevent potential negative consequences for the
environment and human health.
All the Outline electroacoustic and
electronic devices are in accordance with
the objects stated by below CEE directives:
The CE declaration of conformity is attached to the
product warranty.
CONFORMITY
SAFETY REGULATIONS
In order to avoid risks for the user’s and other
people’s safety, as well as annulling the warranty,
it is advisable to read the suggestions in this section
for correct use of the product.
The user must assume the responsibility for
making sure that the use of any rigging system and
its components in any particular circumstance or
venue conform to all applicable laws and regulations
in force at the time.
This unit was designed as part of a sound
reinforcement or audio recording system.
Any use other than that foreseen by the
manufacturer is carried out under the sole
responsibility of the user.
• The unit must ONLY be connected to the
amplified output of an amplifier, a powered
mixer or another unit with this type of output
(e.g. a self-powered loudspeaker enclosure
with an amplified auxiliary output). A suitable
power cable in compliance with current safety
norms must be used to connect the unit.
• The amplifier connected to the unit must only
be switched on after having connected and
switched on all the other components of the
sound reinforcement/recording system, to
avoid annoying noises that can sometimes
damage the loudspeakers.
• The unit must only be moved when the cables
are disconnected.
• Only dedicated accessories, specifically
designed for the system, or any standard
accessories foreseen may be used when
installing.
• The mechanical operation of the product
and the accessories used must be checked
periodically.
• This unit produces high sound pressure levels
that can damage hearing if listened to under
incorrect conditions.
• The unit must only be opened and/or repaired
by specialist staff.
• For any requirements of a technical nature,
contact OUTLINE or authorized staff.
