1313-17F957IM-AA 20120803RA
Page 14 of 25
1-800-59-ROUSH
18. Drill the pilot holes using a 1/8
” drill bit. Drill the 3/8” hole opening using a 3/8” drill
bit and slot the
9/16” holes openings using a 9/16” drill bit.
● Repeat above step for the opposite side.
NOTE:
The bottom edge of the template must be flush with the surface edge of the
bumper cover.
19. Cut out the center template provided for the valance panel and tape into position
with the arrow pointing upward.
Using a center punch, mark the the center of the holes on the template.
