background image

Page 5 of 17 

 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 

or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 

situations that could occur. Exercise common sense and caution when using this tool. Always be 

aware of the environment and ensure that the tool is used in a safe and responsible manner.  

 

Do not allow persons to operate or assemble the product until they have read this manual and 

have developed a thorough understanding of how it works. 

 

Do not modify this product in any way. Unauthorized modification may impair the function and/or 

safety and could affect the life of the product. There are specific applications for which the product 

was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 

industrial equipment. There are certain applications for which this equipment was designed. This 

product will be safer and do a better job at the capacity for which it was intended. DO NOT use 

this equipment for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. 

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas 

may put you dangerously close to cutting tools and rotating parts. 

 

Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence 

of flammable liquids, gases, or dust. The product can create sparks, which may ignite the 

flammable liquids, gases, or dust. 

 

Do not allow the product to come into contact with an electrical source. The tool is not insulated 

and contact will cause electrical shock. 

 

Keep children and bystanders away from the work area while operating the tool. Do not allow 

children to handle the product.  

 

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your 

work area. Some of these hazards may be hidden from your view and may cause personal injury 

and/or property damage if contacted. 

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use 

the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of 

Содержание 57133


















Отзывы: