back to the original position prior to breakage.( Illus p)
Step2.Center breaker punch over rivet head, pull handle down just enough to push rivet out. Repeat
with other rivet (do not use excessive force).
OPERATION
Step1. Insert chain portion to be broken into the slot of the adjustable anvil. (Illus j) Tighten
adjustment knob unit chain is securely positioned. Position cutter as shown. (Illus k)
Important:
It is not necessary to re-adjust anvil when breaking multiple loops of chain of the same chain type.
Step2. Position rivet head directly under punch and pull handle down just far enough to push rivet
out (do not use excessive force). (Illus i)
Note
：
A. Important-when breaking chain at cutter, make sure cutter is in correct position.( Illus m)
B. For cutters with depth gauges as shown in
（
Illus n
）
,make sure to position cutter properly as
shown in (Illus o)using the side of the adjustable anvil with the slot.
MAINTENANCE
•
Maintain your Rivet Spinner &Chain Breaker.
It is recommended that the general condition of
any Rivet Spinner &Chain Breaker be examined before it is used. Keep your Rivet Spinner &
Chain Breaker in good repair by adopting a program of conscientious repair and maintenance.
Have necessary repairs made by qualified service personnel.
•
This unit is equipped with oiling chambers and should be maintained periodically with a
lightweight oil. (Illus H)
