5
⑥
Stereophonic transmission indicator
The red LED will be on during stereophonic transmission.
⑦
Stereophonic/monaural changeover
Changeover switch for stereophonic and monaural transmission. For monaural transmission,
connect either the input L or R, or reduce the input level to half (-6dB) if you connect to both
input L and input R.
⑧
Power
The green LED lights up and the transmitter starts to operate when the power is turned on.
４．
Rear Panel
①
DC input
A terminal for supplying power from an external source. Connect the AC adaptor contained in
the accessory kit. If you use other power supplies, verify the input voltage range (DC11
〜
DC18V) and the polarity. Please choose a power source with the least noise. Use a DC jack of
5.5mm (-) external diameter and 2.1mm (+) internal diameter for connection.
②
DC output
Output voltage will be lower by 1V (approx.) than the input voltage supplied by DC input.
The maximum output current is 300mA. Built-in devices are a reversal protection diode, a
current limiting fuse, and a surge protection (33V) device.
