Rottler SG10XY, Руководство по эксплуатации и обслуживанию

Страница: 51 / 146

Section 4 Control Definitions SG10XY Manual
www.rottlermfg.com
4-11
Head Property Screen
In this page you can enter in all head information, it will be saved into the head program you are in.
General Information
Once selected, all operations of the SG10XY can perform are stored in that Cylinder Head model.
The following is a more detailed list on the head selecting screen.
Program Select
This screen allows you to select, create, edit or delete a Cylinder Head model.
This will change the screen to the MODE SELECT Screen.
New
Pressing this button will bring up page to ADD new head programs . Using the keyboard, type the
desired name for your head, click OK. This will add the head to the list on the left.
Options
To Edit a Cylinder Head Model name, select a Cylinder Head from the list on the left and then press
Options. This will put the name of the selected head on the screen. Use the keyboard to edit the name,
press OK when finished.
Delete
To delete a head, select the head from the list on the left. Press the DELETE button. The screen will ask
you if you want to delete the Head. Select YES or No
Mode Select
One you have selected a head, go to mode select on right half of page.
New
This will pull up different modes available for each head. (The BREAK IN mode is for factory break in only
and will not be needed buy consumer.)