Rottler HP6A, Руководство по эксплуатации и обслуживанию

Страница: 132 / 150

Material Data Safety Sheets 8-12 HP6A Manual
PERSONAL PROTECTION
Personal protective equipment selections vary based on potential exposure conditions such as
applications, handling practices, concentration and ventilation. Information on the selection of
protective equipment for use with this material, as provided below, is based upon intended,
normal usage.
Respiratory Protection:
If engineering controls do not maintain airborne contaminant
concentrations at a level which is adequate to protect worker health, an approved respirator may
be appropriate. Respirator selection, use, and maintenance must be in accordance with
regulatory requirements, if applicable. Types of respirators to be considered for this material
include: No special requirements under ordinary conditions of use and with adequate ventilation.
For high airborne concentrations, use an approved supplied-air respirator, operated in positive
pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen
levels are inadequate, gas/vapor warning properties are poor, or if air purifying filter
capacity/rating may be exceeded.
Hand Protection: Any specific glove information provided is based on published literature
and glove manufacturer data. Work conditions can greatly effect glove durability; inspect and
replace worn or damaged gloves. The types of gloves to be considered for this material include:
No protection is ordinarily required under normal conditions of use.
Eye Protection: If contact is likely, safety glasses with side shields are recommended.
Skin and Body Protection: Any specific clothing information provided is based on published
literature or manufacturer data. The types of clothing to be considered for this material include:
No skin protection is ordinarily required under normal conditions of use. In accordance with good
industrial hygiene practices, precautions should be taken to avoid skin contact.
Specific Hygiene Measures: Always observe good personal hygiene measures, such as
washing after handling the material and before eating, drinking, and/or smoking. Routinely wash
work clothing and protective equipment to remove contaminants. Discard contaminated clothing
and footwear that cannot be cleaned. Practice good housekeeping.
ENVIRONMENTAL CONTROLS
See Sections 6, 7, 12, 13.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for
additional data.
GENERAL INFORMATION
Physical State: Liquid
Color: Amber
Odor: Characteristic
Odor Threshold:
N/D