Rotronic LOG-HC2, Руководство пользователя, Страница: 8 / 60

Instructions
8
V
iewer
Online
Safety instructions and warnings
WARNING
• Read the operating instructions carefully before using the logger or the logger
software . This will protect you personally and avoid damage to the unit .
• The logger is a unit for recording and displaying measurement parameters
and may not be used for safety-related applications .
• Before using the logger check the unit itself and all cables for visible signs of
damage and never operate a damaged logger . A damaged logger can endan-
ger operator safety! Should the logger not function perfectly or appear to be
damaged, send it to Rotronic for repair .
• Ensure that no fluids enter the logger's casing . Fluids cause corrosion
damage and short-circuits inside the logger .
• The logger must never be opened or modified . The manufacturer cannot be
held liable for damage resulting from use other than that for which the unit is
intended, or from improper operation of the unit .
• Never use a logger with a leaking battery . Should a battery leak be detect-
ed ensure that the electrolyte does not come into contact with the skin, the
eyes or the mouth . Should this occur, thoroughly rinse the affected area
with water for at least 15 minutes . Consult a doctor . Do not breathe in any
vapours emitted . Immediately clean the electrolyte from the logger using a
soft cloth and dispose of the cloth subsequently .
CAUTION
• Ensure the proper disposal of an obsolete logger and USB connection cable
->17 .
Setup
Reader