2
Electrical Supply
All of the hot tubs in the RotoSpa range are 13amp ‘plug and play’ compatible meaning they can be connected to the electrical
supply via a UK 3 pin plug.
As a minimum requirement your RotoSpa will need to be connected via a 3 pin plug to an IP rated, waterproof switched socket
outlet (see fig 1) positioned 2-3 meters away. You should ensure the electrical supply is safe and up to current IET regulations.
The circuit must be RCD protected having characteristics specified in regulation 415.1.1 of the IET wiring regulations. The
RotoSpa will be supplied with a 3 meter 3 core flex cable with a male commando plug attached. Please note if your socket is
positioned too far away from the RotoSpa the cable may not reach. To connect your RotoSpa to an IP Rated, waterproof UK 3
pin socket you will require a conversion cable (see fig 2 below). You can purchase these directly from Sutton Pools and Spas.
For ultimate safety Sutton Pools and Spas recommends the RotoSpa is permanently connected (hard wired) to a single phase
240v RCD protected consumer unit directly to an IP rated waterproof rotary isolator. We have our own NICEIC registered
electricians and can provide you with a quotation to carry out any electrical works required.
Fig 1.
Fig 2.
Fig 3.
