IP Converter
YT-930
Product Manual
Ver. 1.23
12
3
Installation
3.1
Safety and Installation Tips
When installing the unit, please ensure to read and follow safety instructions.
➢
Any input or supply pressures to valve, actuator, and / or to other related devices must be turned
off.
➢
Use bypass valve or other supportive equipment to avoid entire system “shut down”.
➢
When installing the unit, please ensure the cover base is headed upward or the cover should face
front, as shown in section 2.8.2. This will ensure internal dew condensation can leak out through
the draining hole.
➢
When installing the unit, please ensure it is installed in the same directions as shown below. This
installation effectively discharges condensate from the inside of the unit through the vent hole to
prevent damage to the internal components caused by condensate.
Fig. 3-1: Right installing direction of The product
